Payment & Shipping Terms:
|Length(Less Bit）:||1011mm||Weight(Less Bit):||43.2Kg|
|External Diameter:||Φ99mm||Bit Shank:||Φ110-Φ135mm|
|Working Pressure:||1.0-3.0Mpa||Connection Thread:||API 2 3/8"Reg|
|Air Consumption:||1.0Mpa 6m³/min OR 1.8Mpa 10m³/min|
water well drilling hammer,
mincon air hammer
The characteristics of High air pressure DTH hammer without foot valve.
It is a kind of high air pressure down the hole hammer, without foot valve, The driling speed is higher than the hammer with foot valve. And more energy efficient.It is one of the most advanced DTH hammers in the word.
It has the following characteristics:
1. Speed increase 15%-30% than the hammer with foot valve.
2. Bits without nylon tube,The problems caused by rupture of nylon tube, expansion, expansion and shrinkage were avoided.
3. Low gas consumption, energy saving 10%.
4. This hammer has simple structure, good reliability and long service life.
1. Standard APl thread,lt is universal Internationally.
Thread through precision processing, smooth without burrs, easy to Install and tlighten.
2. Use high qualty reverse valve,spring and sealing ring.
3. Reasonable air distribution structure, fast drilling speed, low gas consumption, low oll consumption.
4. The piston adopts high quality speclal steel, the mature and stable heat treatment technology and the precislon processing technology guarantee the service life of the piston and the working efficlency of the hammer.
5.The external cylinder using special alloy steel, after heat treatment, It has high abrasion resistance and toughness.
6.The drive sub adopts alloy steel,high precision spline machining,Good versatility and long life.
7. More than 15 years DTH product production experience We can make reasonable plan for you according to your actual working condition.
1. How can i place an order?
Please provide the product specification, requirement and quantity you need,We will contact with you at the first time.
We can communicate through Wechat/Skype/WhatsApp/Email to facilitate our more efficient communication.
2. What kind of engineering equipment and drilling tools do we provide?
① Drilling rig ② Water well drilling rig ③ Integrated drilling rig
④ Hydraulic tunneling drilling rig ⑤ Air compressor
① DTH hammer ② DTH bits ③ Drilling rod
④ Top hammer bits ⑤ Shank adapter ⑥ Taper bits
⑦ Taper rods
3. How about the warranty ?
Guarantee according to industry standard.
4. What is your terms of delivery?
We accept EXW, FOB, CFR, CIF, DDU, DDP, etc. You can choose the one which is the most convenient or cost effective for you.
Contact Person: Bruce